Internal Data Search by Text Descriptor

Data Search on:



Mississippi Lime Presentation 2017: Targeted DSI Improvements

Curt Biehn of Mississippi Lime made this presentation in 2017 which shows the following list of targeted DSI improvement: (1) Reduce scale and plugs, (2) Optimize distribution for O&M benefits, (3) Reduce minimum operating temperature requirement, (4) use prior to wet scrubbing for selenium and HCl removal ( SO3 was not listed but would be another in this category)

Revision Date:  2/25/2019

Tags:  221112 - Fossil Fuel 化石燃料, Mississippi Lime, Dry Sorbent Injection


Dry Scrubbing Issues and Options - Hot Topic Hour November 12, 2015.

Insights of the lime suppliers, power plant owners and experts on Dry Scrubbing.

Revision Date:  11/12/2015

Tags:  221112 - Fossil Fuel 化石燃料


Busch Fume Control and Aluminum Mill Air Permits

Aluminum rolling mill exhaust information is displayed from the Mcilvaine Global Decisions Orchard. Specific applications of CEC0 Busch fume control are covered along with air permits.

Revision Date:  8/20/2015

Tags:   


Dry Flue Gas Desulfurization for Power Plants by Mitchell Krasnopoler, Kiewit - Hot Topic Hour March 19, 2015

Mitch compared the features of various dry scrubbing systems.

Revision Date:  3/20/2015

Tags:  221112 - Fossil Fuel 化石燃料, Kiewit, SDA, DSI


Power Plants - Automated Systems for Sorbent Handling & Liquefying by Jeff Doherty, Semi-Bulk Systems - Hot Topic Hour February 26, 2015

Jeff described the injection system using a venturi ejector principle to introduce the PAC to the recirculating scrubber slurry.

Revision Date:  2/27/2015

Tags:  221112 - Fossil Fuel 化石燃料, Semi-Bulk Systems, Activated Carbon, Mercury, Limestone


MATS Agenda by Bob McIlvaine, McIlvaine Company - Hot Topic Hour January 29, 2015

Bob provided an overview of the whole MATS decision making process using the GdPS™ Concept.

Revision Date:  1/29/2015

Tags:  221112 - Fossil Fuel 化石燃料, McIlvaine, Activated Carbon, Dry Sorbent Injection, Precipitator, Fabric Filter, MATS, Particulate, SO2, HCl, Mercury Removal


DSI for MATS and CSAPR by Jim Dickerman, Lhoist / Chemical Lime - Hot Topic Hour January 29, 2015

Jim Dickerman provided recent data to show what a unique hydrate achieved.

Revision Date:  1/29/2015

Tags:  221112 - Fossil Fuel 化石燃料, Lhoist, Dry Sorbent Injection, MATS, SO2, HCl


CFB-FGD for 660 MW Coal-fired Units - Introduction of Hanfeng Project by Jianchun Wang, Fujian Longking - Hot Topic Hour October 23, 2014

Jianchun Wang of Lonjing Environment Technology provided details on the Hangfeng Project. The installation has exceeded the guarantee limits. SO2 removal is 93 percent.

Revision Date:  10/23/2014

Tags:  221112 - Fossil Fuel 化石燃料, Longking, Circulating Dry Scrubber, Dry FGD, Incinerator


McIlvaine Agenda by Bob McIlvaine - Hot Topic Hour October 23, 2014

CDS vs. SDI vs. SDA in Dry Scrubber

Revision Date:  10/23/2014

Tags:  221112 - Fossil Fuel 化石燃料, McIlvaine, Incinerator, Dry Sorbent Injection, Circulating Dry Scrubber, Dry FGD, Spray Dryer


Which Dry Scrubber Technology Do I Choose? By Paul Farber, P. Farber & Associates, LLC - Hot Topic Hour October 23, 2014

Paul Farber provided a valuable overview with decisive classification of the alternatives. Each of the three options has some advantages and some disadvantages.

Revision Date:  10/23/2014

Tags:  221112 - Fossil Fuel 化石燃料, P. Farber & Associates, LLC, Dry FGD, Circulating Dry Scrubber, Spray Dryer, Dry Sorbent Injection


Advanced Air Quality Control Retrofit Solutions for PC Fired Boilers by Joseph Riley, BoldEco - Hot Topic Hour October 23, 2014

Regarding the development of the expertise, Joe Riley of BoldEco cited some of the early European work by Solvay and the BoldEco European partner as the first sodium dry scrubber installation.

Revision Date:  10/23/2014

Tags:  221112 - Fossil Fuel 化石燃料, BoldEco Environment, Spray Dryer, Dry Sorbent Injection, Incinerator, Dry FGD, Circulating Dry Scrubber


Gas Suspension Absorber by Mike Widico and Kevin Cosman, KC Cottrell - Hot Topic Hour October 23, 2014

Mike Widico and Kevin Cosman of KC Cottrell presented a number of positive features about their design. It is compact and even with the cyclone can be fitted into most power plants. Because of the cyclone to capture the calcium sulfate, the downstream precipitator is not contaminated by large quantities of high resistivity dust.

Revision Date:  10/23/2014

Tags:  221112 - Fossil Fuel 化石燃料, KC Cottrell, Dry FGD, Circulating Dry Scrubber, Incinerator


Slides from NatronX which include Trona vs. SBC at Low Temperature by Melissa Patasnick and Joshua Allen, NatronX Technologies - Hot Topic Hour August 14, 2014

Trona information.

Revision Date:  8/14/2014

Tags:  221112 - Fossil Fuel 化石燃料, NatronX Technologies, Trona, MACT, Mercury


MATS Emission Testing and Monitoring Requirements, by Kevin Crosby, Montrose Environmental (The Avogadro Group) - Hot Topic Hour August 7, 2014

Kevin addressed monitoring needs. There are continuous monitoring and periodic testing options for toxic metals, mercury and HCl.

Revision Date:  8/7/2014

Tags:  221112 - Fossil Fuel 化石燃料, The Avogadro Group, Testing, Natural Gas, MATS


Converting to Natural Gas for MATs Compliance by R. Gifford Broderick, Combustion Components Associates - Hot Topic Hour August 7, 2014

Giff Broderick addressed the option of converting to natural gas-firing in an existing boiler.

Revision Date:  8/7/2014

Tags:  221112 - Fossil Fuel 化石燃料, Combustion Components Associates, Burner, MATS, Natural Gas


Mercury Control Technology Using Sorbent Enhancement Additives - Keys to Dry Sorbent Injection by Marcus Sylvester, Midwest Energy Emissions Corp. - Hot Topic Hour July 10, 2014

Marc explained how their custom sorbents provide both mercury and trim SO2 control.

Revision Date:  7/10/2014

Tags:  221112 - Fossil Fuel 化石燃料, Midwest Energy Emissions Corp, Dry Sorbent Injection


O&M Issues DSI Systems - Startup, Shutdown & Cycling Loads by Tony Licata, Licata Energy - Hot Topic Hour July 10, 2014

Tony Licata, Principal, Licata Energy & Environmental Consultants, Inc. indicated that the new regulations regarding startup and shut down emissions require utilities to meet the following challenges.  How soon can we turn or turn off on DSI and carbon systems?  Prevent deposits forming in ductwork.  Sorbent contact with acid gases/Hg at low flow conditions – mass transfer.  Does the chemistry work at lower temperatures seen during startup/shutdown?  Contact time.  Impacts on balance of plant.

Revision Date:  7/10/2014

Tags:  221112 - Fossil Fuel 化石燃料, Licata Energy, Dry Sorbent Injection


Dry Sorbent Injection Panel Discussion by Paul Farber, P. Farber & Associates, LLC - Hot Topic Hour July 10, 2014

Paul Farber, Principal, P. Farber & Associates, LLC gave a good overview and was able to consolidate the basic aspects of DSI as follows:  98% reduction of SO3, H2SO4, and HCl possible with DSI  90% reduction of SO2 with DSI has been demonstrated  High percentage reduction of SO2 with DSI can result in the sorbent and reaction products entering the PM control device to be as much as the flyash loading  Where Trona or SBC is injected the collected material will have significant levels of sodium  Leachate tests of flyash/Trona/SBC mixtures have shown increased levels of metals such as selenium as well as sodium.

Revision Date:  7/10/2014

Tags:  221112 - Fossil Fuel 化石燃料, P. Farber & Associates, LLC, Dry Sorbent Injection


SOLVAir Solutions Focus on DSI by Michael Atwell, Solvay Chemicals, Inc. - Hot Topic Hour July 10, 2014

Michael (Mike) Atwell, Market Development Manager, Solvay Chemicals Inc indicated that most of the recent activity is due to the NAAQS of 75 ppm SO2 and realization that to meet 2018 deadlines the time for action is now.

Revision Date:  7/10/2014

Tags:  221112 - Fossil Fuel 化石燃料, SOLVAir Solutions, Dry Sorbent Injection


Strategy to Improve Air Preheater Performance via SO3 Control by Sterling Gray, URS Corporation - Hot Topic Hour January 9, 2014

Sterling showed how to improve thermal energy recovery from Air Preheaters which is typically limited by the presence of sulfuric acid and other fouling compounds in the flue gas stream.

Revision Date:  1/9/2014

Tags:  221112 - Fossil Fuel 化石燃料, URS Corp., Air Preheater, Dry Sorbent Injection


UCC Dry Sorbent Injection, Multi-Pollutant Removal with DSI by Jon Norman, United Conveyor - Hot Topic Hour September 27, 2013

 

Revision Date:  9/27/2013

Tags:  221112 - Fossil Fuel 化石燃料, United Conveyor, Pneumatic Conveyor, Dry Sorbent Injection, MATS, Coal


Full-scale Plant Trials of Novinda's Non-carbon Mercury Capture Reagent by Jim Butz, Novinda - Hot Topic Hour August 1, 2013

Talked about Novinda's amended silicates is a non-carbon sorbent for capture of mercury from coal-fired power plants.

Revision Date:  8/1/2013

Tags:  221112 - Fossil Fuel 化石燃料, Novinda, Dry Sorbent Injection, Mercury


UCC Dry Sorbent Injection HCl Removal by Jon Norman, United Conveyor - Hot Topic Hour July 18, 2013

Results of HCl removal tests using Dry Sorbent Injection.

Revision Date:  7/18/2013

Tags:  221112 - Fossil Fuel 化石燃料, United Conveyor, Sodium Bicarbonate, Trona, Dry Sorbent Injection, Reagent, HCl, Air Quality, Mercury, SO2, SO3


Hydrated Lime for HCl Mitigation by Pat Mongoven, Mississippi Lime - Hot Topic Hour July 18, 2013

Results of several full-scale demonstrations to reduce HCl below the levels required by MATS.

Revision Date:  7/18/2013

Tags:  221112 - Fossil Fuel 化石燃料, Mississippi Lime, Lime, Dry Sorbent Injection, HCl, MATS


SOLVAir Solutions by Michael Wood, Solvay Chemicals - Hot Topic Hour July 18, 2013

Discussed the use of trona and sodium bicarbonate for HCl control.

Revision Date:  7/18/2013

Tags:  221112 - Fossil Fuel 化石燃料, Solvay Chemicals, Trona, Sodium Bicarbonate, Dry Sorbent Injection, Reagent, Air Quality, HCl, Mercury, SO2, SO3


Dry Sorbent Injection for CPM Mitigation by Steve Baloga, Novinda - Hot Topic Hour July 11, 2013.

Pilot work at a calciner where the CPM was a very large multiple of the discrete particulate.

Revision Date:  7/11/2013

Tags:  221112 - Fossil Fuel 化石燃料, Novinda, Dry Sorbent Injection, MATS, PM2.5, Condensibles


ACI Material Handling Gen 3 by Keith Day, Nol-Tec - Hot Topic Hour June 20, 2013

Discussion of Gen 3 Material Handling for ACI systems

Revision Date:  6/20/2013

Tags:  221112 - Fossil Fuel 化石燃料, Nol-Tec Systems, Dry Sorbent Injection, Lime, Mixing, Conveying, Mercury


EMO™ by Bobby I.T. Chen, CB and I - Hot Topic Hour June 20, 2013

Bobby provided the EMO™+HL, Total MATS Compliance Solution"

Revision Date:  6/20/2013

Tags:  221112 - Fossil Fuel 化石燃料, CB&I, Bromine, Activated Carbon, Dry Sorbent Injection, Air Quality, Mercury, Air Pollution Control


Delta DSI Static Mixers by Clayton Erickson, Babcock Power - Hot Topic Hour June 20, 2013

Mixing and flow modeling techniques used to improve DSI performance.

Revision Date:  6/20/2013

Tags:  221112 - Fossil Fuel 化石燃料, Babcock Power, Dry Sorbent Injection, Lime, Mixing, Ammonia, Mercury, SO3


Sorbent Enhancement Additive Mercury Capture Technology by Marc Sylvester, Midwest Energy Emissions - Hot Topic Hour April 11, 2013

Marc said that their mercury capture programs are used at several utilities.

Revision Date:  4/11/2013

Tags:  221112 - Fossil Fuel 化石燃料, Midwest Energy Emissions Corp, Dry Sorbent Injection, Mercury


Current Status of MATS Implementation and Consideration of MATS controls on other Environmental Drivers by Block Andrews, Burns & McDonnell - Hot Topic Hour February 28, 2013

Block discussed current MATS implementation, risks and strategic considerations.

Revision Date:  2/28/2013

Tags:  221112 - Fossil Fuel 化石燃料, Burns & McDonnell, Dry Sorbent Injection, PM2.5, HCl, MATS, Mercury


High reactivity lime very efficient on HCl by Richard Zhang and Curtiss Biehn, Mississippi Lime - Hot Topic Hour August 23, 2012

High Reactivity Hydrate for Acid Gas Mitigation

Revision Date:  8/23/2012

Tags:  221112 - Fossil Fuel 化石燃料, Mississippi Lime, Lime, Dry Injection


Dry Sorbent Injection for Simultaneous MATS Compliance/SO2 Removal DSI Technology by Jon Norman, United Conveyor - Hot Topic Hour August 17, 2012

The ability to remove HCl and SO2 with finely ground trona.

Revision Date:  8/17/2012

Tags:  221112 - Fossil Fuel 化石燃料, United Conveyor, SO3 Monitoring, Dry Sorbent Injection


Post-Combustion Dry Reagent Injection for Acid Gas Mitigation Boilers and Cement Kilns by Steve Baloga, Southern Air - Hot Topic Hour June 21, 2012.

The results of trona injection for SO2 and HCl reduction for a utility boiler with ESP, an industrial boiler with ESP and a cement kiln with FF baghouse.

Revision Date:  6/21/2012

Tags:  221112 - Fossil Fuel 化石燃料, Southern Air Solutions, Dry Sorbent Injection, Fabric Filter, Electrostatic Precipitator, Lime, Trona, SO2, Mercury, HCl, Reagent Preparation


Understanding Hydrated Lime Properties in Acid Gas Control by Mike Tate, Graymont - Hot Topic Hour June 21, 2012.

Key properties of hydrated lime that impact sorbent performance.

Revision Date:  6/21/2012

Tags:  221112 - Fossil Fuel 化石燃料, Graymont, Sodium Bicarbonate, Lime, Fabric Filter, Electrostatic Precipitator, Dry Sorbent Injection, Trona, HCl, Mercury, SO3, Reagent Preparation


Meeting Regulatory Needs with Hydrated Lime by Curt Biehn, Mississippi Lime - Hot Topic Hour June 21, 2012

The performance of hydrated lime when injected at different points in the flue gas train and with different pollution control equipment

Revision Date:  6/21/2012

Tags:  221112 - Fossil Fuel 化石燃料, Mississippi Lime, SCR, Fabric Filter, Electrostatic Precipitator, Dry Sorbent Injection, Lime, SO3, HCl


Impact of Mixing on Performance of Dry Sorbent Injection/Activated Carbon by Tony Licata, Babcock Power - Hot Topic Hour June 21, 2012.

The impact of mixing on the performance of dry sorbent injection systems.

Revision Date:  6/21/2012

Tags:  221112 - Fossil Fuel 化石燃料, Babcock Power, Lime, Dry Sorbent Injection, Mixing, Ammonia, Mercury, SO3


Dry Injection of Sodium Sorbents - Effects of Using Mills by Yougen Kong, Solvay - Hot Topic Hour June 21, 2012

The effect of milling sodium sorbents on their performance in removing HCl and SO2.

Revision Date:  6/21/2012

Tags:  221112 - Fossil Fuel 化石燃料, Solvay Chemicals, Sodium Bicarbonate, Lime, Dry Sorbent Injection, Trona, SO3, SO2, Mercury, HCl, Reagent Preparation, Milling


Dry Sorbent Injection and Gas Co-Fire / FLGR for Small to Medium Plants by Chetan Chothani, Breen Energy Solutions - Hot Topic Hour June 7, 2012.

Summary of the challenges facing small to medium size coal-fired power plants without SCRs and scrubbers in meeting MATS and CSAPR regulations.

Revision Date:  6/7/2012

Tags:  221112 - Fossil Fuel 化石燃料, Breen Energy Solutions, Lime, Dry Sorbent Injection, SO3, HCl, Mercury, Reagent Preparation


Dry Sorbent Injection and Modeling for Acid Gas Emissions Control by Lew Benson, Nalco Mobotec. - Hot Topic Hour June 7, 2012.

Lew endorsed modeling of dry sorbent injection including not just CFD but also chemical reaction modeling.

Revision Date:  6/7/2012

Tags:  221112 - Fossil Fuel 化石燃料, Nalco Mobotec, CFD, Lime, Trona, Dry Sorbent Injection, HCl, SO3, Mercury, Reagent Preparation


MPS Grinding Technology for Dry Sorbent Injection and Material Handling by Blaz Jurko, GEBR. PFEIFFER - Hot Topic Hour June 7, 2012.

Discussion on technology for dry sorbent material preparation and grinding.

Revision Date:  6/7/2012

Tags:  221112 - Fossil Fuel 化石燃料, Gebr. Pfeiffer, Lime, Dry Sorbent Injection, SO3, HCl, Mercury, Grinding, Reagent Preparation


Mercury Control Technology Using Sorbent Enhancement Additives by Marcus Sylvester, Midwest Energy Emissions - Hot Topic Hour June 7, 2012.

Marcus provided efficiency comparisons for the patented “Sorbent Enhancement Additives” technology for mercury control compared to brominated activated carbon.

Revision Date:  6/7/2012

Tags:  221112 - Fossil Fuel 化石燃料, Midwest Energy Emissions Corp, Lime, Dry Sorbent Injection, Mercury, SO3, HCl, Reagent Preparation


Ten Years after Dry Sorbent Injection 2012 by David Escott, FLSmidth - Hot Topic Hour June 7, 2012

David pointed out that the experience with SO3 mitigation was the foundation for DSI injection for SO2 and HCl.

Revision Date:  6/7/2012

Tags:  221112 - Fossil Fuel 化石燃料, FLSmidth, Trona, Pneumatic Conveyor, Lime, Dry Sorbent Injection, SO3, HCl, Mercury, Reagent Preparation


Meeting the Challenge of Utility Hg Control by Ronald Landreth, Albemarle - Hot Topic Hour April 12, 2012

Specially designed concrete-friendly, gas- phase brominated PACs are now routinely used to both provide high levels of Hg capture and allow continued use in cement.

Revision Date:  4/12/2012

Tags:  221112 - Fossil Fuel 化石燃料, Albemarle, Bromine, Dry Sorbent Injection, Mercury, Utility MACT, Air Quality, Air Pollution Control


Activated Carbon - Status Update by Robert Nebergall, Norit - Hot Topic Hour April 12, 2012.

The supply/demand situation developing for the compliance period for both activated carbon and equipment will also be highlighted.

Revision Date:  4/12/2012

Tags:  221112 - Fossil Fuel 化石燃料, Norit, Dry Sorbent Injection, Air Quality, Mercury, Utility MACT, Air Pollution Control


Overview of MATS for Existing & New Plants by Connie Senior, ADA - Hot Topic Hour April 12, 2012.

Connie reviewed the regulations and the ability of activated carbon to meet the requirements.

Revision Date:  4/12/2012

Tags:  221112 - Fossil Fuel 化石燃料, ADA-ES, Dry Sorbent Injection, Mercury, Utility MACT, Air Quality, Air Pollution Control


EMO™ by Bobby Chen, Shaw - Hot Topic Hour April 12, 2012

Bobby described a two-stage process for controlling the mercury emission from the coal combustion process.

Revision Date:  4/12/2012

Tags:  221112 - Fossil Fuel 化石燃料, Shaw Group, Bromine, Activated Carbon, Dry Sorbent Injection, Mercury, Air Quality, Air Pollution Control


Environmental Compliance Solutions in the Age of Air Toxics and CSAP Rules, presented by John Buschmann, Alstom Power. Hot Topic Hour October 27, 2011.

John Buschmann, Technology Manager at ALSTOM Power Inc., provided an overview of the proposed Utility MACT emission values and discussed the implications for utilities seeking compliance not only under Utility MACT but also under CSAPR and various other existing and anticipated regulations. The solution is not a one-size-fits-all approach but rather a careful balancing of combinations of AQCS technologies that make up an overall compliance plan.

Revision Date:  10/27/2011

Tags:  221112 - Fossil Fuel 化石燃料, Alstom Power, SCR, Circulating Dry Scrubber, Spray Tower, Reagent, Dry Sorbent Injection, FGD, Spray Dryer Absorber, Chemical Injection, Air Quality, SO2, SO3, HCl, Mercury


Circulating Dry Scrubbers for PM2.5 Compliance by Terence Ake, Babcock & Wilcox - Hot Topic Hour - May 12, 2011

Terence Ake discussed circulating dry scrubbers for PM2.5 compliance

Revision Date:  5/12/2011

Tags:  221112 - Fossil Fuel 化石燃料, Babcock & Wilcox, Circulating Dry Scrubber, PM2.5


Lime-based Circulation Dry Scrubber for Existing Coal-fired EGUs to Comply with the Proposed Utility MACT by Shiaw Tseng, Graymont. Hot Topic Hour April 7, 2011.

Shiaw Tseng, Marketing Manager at Graymont, Inc., described a multi-pollutant control system for existing coal-fired power plants using lime-based Circulating Dry Scrubbers (CDS) to remove SO2, SO3, HCl, and HF. He presented the results of performance guarantee tests conducted at the AES Greenidge Station Unit #4 (107 MW) burning eastern bituminous coal (2.5 to 3 percent sulfur) with a CDS and baghouse. These tests showed pretty impressive reductions of SO2, SO3, Hg and HCl to levels that were well under the limits in the proposed utility MACT. Advantages of this system include a relatively small footprint, fuel flexibility (including biomass), low water consumption and dry byproducts (no wet sludge). Interestingly, the CDS system achieved better mercury reduction than using ACI under the same operating conditions, indicating that ACI is not required. These systems are currently operating at 14 plants in the U.S.

Revision Date:  4/7/2011

Tags:  221112 - Fossil Fuel 化石燃料, Graymont, Circulating Dry Scrubber, Lime


A Better Alternative to SO3 for Conditioning Electrostatic Precipitators - by Yougen Kong, Solvay - Hot Topic Hour January 20, 2011

A better alternative to SO3 for conditioning electrostatic precipitators. The trona addition system is simple and its capital cost is much lower than that of a SO3 production and injection system.

Revision Date:  1/20/2011

Tags:  221112 - Fossil Fuel 化石燃料, Solvay Chemicals, Dry Sorbent Injection, Mercury


Gas-Phase Brominated PAC for ESP Performance Improvement by Ron Landreth, Albemarle - Hot Topic Hour January 20, 2011

ESPs and Additives

Revision Date:  1/20/2011

Tags:  221112 - Fossil Fuel 化石燃料, Albemarle, Dry Sorbent Injection


Modifying Ash Resistivity and Improving ACI Performance for Mercury Control with Liquid Flue Gas Conditioning by Jean Bustard, ADA-ES - Hot Topic Hour January 20, 2011

Conditioning systems and additives.

Revision Date:  1/20/2011

Tags:  221112 - Fossil Fuel 化石燃料, ADA-ES, Dry Sorbent Injection


Industrial MACT - Impact and Control Options by David South, Amerex - Hot Topic Hour November 19, 2010

David W. South, Manager of Business Development at Amerex, drew from a considerable bank of experience the company has gained with some 50 MACT related boiler installations in the last five years. One unit on a PC boiler with carbon injection and a fabric filter is using 2.2 lbs/MMacf of B-PAC. Inlet mercury is 20 lbs/TBtu versus 2.5 lbs/TBtu on the outlet. Another with only 2.0 lbs/MMacf is reducing mercury from 25 lbs/TBtu to less than 2 lbs/TBtu.

Revision Date:  11/19/2010

Tags:  221112 - Fossil Fuel 化石燃料, Amerex, Spray Dryer, Fabric Filter, Dry Sorbent Injection, MACT, Industrial Boiler