Internal Data Search by Product
The many different applications for FRP vessels, ducts and linings.
Revision Date: 8/9/2012
Tags: 221112 - Fossil Fuel 化石燃料, AOC Resins, Alloy Steel, Scrubber, Corrosion
Materials for Corrosion APC Systems - Webinar - Hot Topic Hour August 9, 2012
Various materials and fabrication techniques which are helping power plants cost-effectively reduce corrosion.
Revision Date: 8/9/2012
Tags: 221112 - Fossil Fuel 化石燃料, Special Metals, AOC Resins, Augusta Fiberglass, Sauereisen, Scrubber, Chimney, Lining, Alloy Steel, FRP, Corrosion
Torresol Gemasolr to Use 347 H from Outokumpu and Molten Salt Fabrication from Emypro
The Gemasolar Concentrating Solar plant under construction in Seville, Spain will include 23 x 14 meter salt storage tanks made with 347 H plate supplied by Outokumpu to the tank fabricator Emypro
Revision Date: 6/13/2011
Tags: 221114 - Solar Power , Industeel, Emypro, Outokumpu, Torresol Energy, 347 H, Solar Thermal, Alloy Steel, Storage Tank, Molten Salt System
Nuclear Power Applications from Industeel
Nuclear reactors, nuclear waste transport and storage casks all require high-purity nuclear-grade steels, often in great thicknesses. And for the steam turbines used to generate electricity from nuclear power, you need steels that retain their properties at high temperatures and over long periods of time. In addition to steels for steam boilers and tubes, Industeel has extensive experience in nuclear-grade products and offers a wide range of sizes suited to nuclear power stations, primary looks as well as for both steel plate and formed parts that offer sufficient reliability to replace forged solutions. Our factories have been approved by all major nuclear certification organizations (ASME III, RCCM) and we produce all the steel grades required for nuclear applications. In addition, we have the necessary know-how to develop new and better steel solutions for both existing and future nuclear technologies.
Revision Date: 5/16/2011
Tags: 221113 - Nuclear Electric Power Generation * , Industeel, Storage Cask, Alloy Steel, Waste Storage, Waste Transport
Hydroelectric Power Plant Steels Supplied by Industeel
Hydroelectric power plants require steel with exceptional mechanical properties including weldability and reliability in forming. Industeel offers high-strength steel solutions with enhanced weldability in a wide range of formats for applications ranging from penstocks to heavy-duty plates used to build massive structural parts, lean duplex or weldable martensitic (13 4 Mo or PH grades ) combining strength and useful resistance to corrosion , cavitation and wear.
Revision Date: 5/16/2011
Tags: 221111 - Hydroelectric Power Generation 水力发电, Industeel, Alloy Steel, Plate, Turbine Generator
Industeel Soleil C5 is Ideal for Shafts and Impellors for Hydropower Turbines
Soleil C5 grade is specially designed for applications requiring high strength, high toughness and medium corrosion resistance properties. The chromium, nickel and molybdenum additions make the alloy resistant to corrosion in fresh water. Typical applications are hydroelectric turbines and systems (blades, runners, gates, rings, shield plates,…), hydropter wings to fight cavitation by high speed water.
Revision Date: 5/16/2011
Tags: 221111 - Hydroelectric Power Generation 水力发电, Industeel, Impellor, Shaft, Alloy Steel, Lube System
Corrosion of Alloy 2205 in Wet Flue Gas Desulfurization Systems Rob Grabarczyk, We Energies Significant pitting was discovered in two newly commissioned wet flue gas desulfurization absorber vessels. The vessels are constructed of solid duplex alloy 2205 with both vessels accumulating less than six months of operation when the pitting was discovered. This presentation provides a description of the pitting and We Energies efforts to determine the cause and potential solutions to ensure reliable operation of the system.
Revision Date: 4/14/2011
Tags: 221112 - Fossil Fuel 化石燃料, We Energies, Alloy Steel, Air Quality, USA
Revision Date: 3/24/2011
Tags: 221112 - Fossil Fuel 化石燃料, EPRI, Ultra-Supercritical Boiler, Alloy Steel, Power Generation
Devin Wachowiak, Applications Engineer at Rolled Alloys, listed the successes of AL-6XN and ZERON 100 in the FGD industry. These alloys have been used in FGD units for many years with many successful installations. There are installations in Europe as well as the U.S.
Revision Date: 1/6/2011
Tags: 221112 - Fossil Fuel 化石燃料, Rolled Alloys, FGD, Alloy Steel
Dr. Deba Maitra, Research & Technology at Special Metals Corporation, related the results of laboratory and field testing (at a power plant in Indiana which is experiencing corrosion of 2205) which showed that while the duplex steel was severely attacked by the environment, super-austenitic stainless steel and nickel-base alloy specimens were much more resistant. The super-austenitic stainless is about half the price of C 276 and has equivalent corrosion resistance. It is being used in a new scrubber system being built in North Dakota.
Revision Date: 1/6/2011
Tags: 221112 - Fossil Fuel 化石燃料, Special Metals, FGD, Alloy Steel
Corrosion Issues in and Materials for Power Plant APC Systems Webinar - Part 1 - January 6, 2011.
Three speakers discussed the latest developments in materials for corrosion prevention or reduction for the various APC equipment in a typical coal-fired power plant based on plant specific site conditions, capital cost, maintenance and life time and provided an update of the current developments, on-going testing or performance of installations of corrosion resistant materials or new technology being developed at their respective companies.
Revision Date: 1/6/2011
Tags: 221112 - Fossil Fuel 化石燃料, Rolled Alloys, Special Metals, AOC Resins, Chimney, FGD, Duct, Alloy Steel, FRP