The market for cross-flow membrane systems, repair parts, replacement membranes, chemicals and related instrumentation for use in gas turbine and combined cycle power plants will exceed $550 million this year.  This is the conclusion by the McIlvaine Company in several individual market reports published by the company. (www.mcilvainecompany.com)

Gas turbine systems utilize cross-flow systems including reverse osmosis, ultrafiltration and microfiltration in a number of processes.  They include;

1.      Intake water

2.      Boiler feedwater

3.      Cooling tower recycle

4.      Fogging nozzle dematerialized water

5.      Wastewater from the cooling tower and balance of plant.

There is increasing use of treated municipal wastewater in new plants.  This frequently requires the use of membrane systems to make the water suitable for plant uses.  The boiler feedwater system includes a series of filtration steps and it is common to have microfiltration or ultrafiltration for prefiltration before entering the reverse osmosis (RO) system.

Cooling water, as it recycles, builds up concentrations of solids which must be reduced. Microfiltration is one option to accomplish the needed separation. Fogging nozzles improve the plant output by evaporating water in the inlet gas stream.  This water must be purified to prevent maintenance problems.

There is the increasing practice of eliminating all wastewater in a zero liquid discharge system.  Cross-flow membranes are used to provide water for reuse.

The membranes must be replaced every few years. Also repair parts for pumps, valves and instrumentation require significant investment.  Treatment chemicals are needed to aid separation and to prevent membrane scaling.

Further information on this market can be found in: RO, UF, MF World Markets, click on: 
http://home.mcilvainecompany.com/index.php/markets/2-uncategorised/120-n020.

For more information on Gas Turbine and Combined Cycle Supplier Program, click on:

http://home.mcilvainecompany.com/index.php/markets/28-energy/610-59ei.

The market for valves in gas turbine and combined cycle power plants will exceed $1 billion this year.  This is the conclusion by the McIlvaine Company in Gas Turbine and Combined Cycle Supplier Program.  (www.mcilvainecompany.com)

The total market for valves in the power industry will be $7.5 billion in 2014.  This forecast appears in Industrial Valves World Markets also published by the McIlvaine Company.  Gas turbines presently represent 13 percent of the power valve market, but this market share will increase.

Gas turbine systems utilize valves in a number of processes.  They include:

1.      Intake water

2.      Boiler feedwater

3.      Cooling tower recycle

4.      Fogging nozzle flow

5.      Wastewater from the cooling tower and balance of plant

6.      Primary and secondary fuel  control

7.      Steam cycle control and safety

8.      Ammonia injection for NO_x control

9.      Lubrication of rotating parts

The environmental constraints imposed on power plant operators in the U.S. coupled with the low cost of natural gas, will result in gas turbine valve expenditures of $225 million this year. The Middle East and several other regional markets are surging.

There are some problems requiring replacement and repair which are contributing to the $400 million replacement market this year. Stellite delamination of steam valves has been one of the problems requiring correction and investment. Other problems deal with the need of faster and more frequent startup and shutdown to compement the intermittent energy supplied by renewable energy sources.

For more information on:

http://home.mcilvainecompany.com/index.php/markets/28-energy/610-59ei