BIOS, ABSTRACTS, PHOTOS

MARCH 28, 2013

“Mercury Measurement & Control”

 

 

BOBBY CHEN – CB&I

 

 

BIO: Former Assist Director of the Energy Research Center at Western Kentucky University, and currently employed with the CB&I Group as a Client Program Manager. He has extensive experiences in coal-fired combustion system emission control, at more than 200 coal-fired units performing evaluations for enhanced acid gas scrubbing particulate matters and metal emissions control.

 

ABSTRACT: EMO™+HL, Total MATS Compliance Solution

There are critical reasons to enhance mercury oxidization using CB&I's technology because controlling mercury (Hg) emission from the coal combustion process is best achieved through a two-stage process. The first stage is to promote the mercury oxidization at the combustion chamber outlet. The second stage is to provide a means of absorbent to capture the oxidized mercury. On numerous of CB&I’s field EMO trials, EMO has been proven to achieve 90% plus Hg oxidization, thus facilitates the downstream AQCS Hg control efficiency. Furthermore, EMO was also found to be the most cost-effective way of controlling stack Hg.

 

 

 

VOLKER SCHMID – CLEAN AIR ENGINEERING

 

BIO: Dr. Volker Schmid is the Technical Leader of Clean Air Engineering’s Advanced Monitoring Solutions Group. Volker obtained his PhD in Environmental Sciences/Physics from Portland State University and has been with CleanAir since 2002. Volker is one of the principal designers of CleanAir's MET-80 sorbent trap mercury monitoring system, which is installed in over 40 electric utility units throughout the U.S.

 

ABSTRACT: “Mercury Compliance Monitoring in 2015 and Beyond”

 

 

 

 

SHARON SJOSTROM – ADA-ES

 

BIO: Ms. Sharon Sjostrom is the Chief Technology Officer for ADA-ES, Inc. where she provides leadership in the identification, selection, development, commercialization, and continued improvement of ADA’s technologies and products.  She has over twenty years of experience in managing research and development programs for measuring and controlling particulate and gaseous emissions from power plants and other combustion sources, with specific expertise in mercury and CO2 control.  She has Masters degrees in both Mechanical Engineering and Business, is a registered Professional Engineer in the state of Colorado, has been awarded 11 patents, and has published over 50 technical papers.

 

 

 

Dr. JAMES STAUDT – ANDOVER TECHNOLOGY PARTNERS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BIO: Dr. Staudt is the Principal Owner of Andover Technology Partners

 

ABSTRACT: Issues facing utility boilers, industrial boilers and Portland cement kilns that need to measure and control Hg emissions.