OVERVIEW OF POWER-GEN TRUE COST INVESTIGATIONS

Power-Gen has a number of courses, speeches and exhibits with useful information about air pollution control, pumps, valves and other flow and treat products. The following tour guides are to assist decision makers in their scheduling. This guide will be continually updated until November 16 and the latest version will be on display at

http://www.mcilvainecompany.com/PowerGen_2019/Power-Gen_2019_Information.pdf

There are two purposes

·         Help suppliers with programs to pursue the Most Profitable Market through collaborating for True Cost Investigations.

·         Communicate true cost data to end users to help the industry validate the products with the lowest true cost.

A number of  true cost investigations are being made available to attendees and are described with separate links. There are relevant workshops, presentations and exhibits which are tabulated below.

Relevant Workshops 

 

GU 303: Modern Boiler-turbine Control Strategies and Tuning for Improved Ramping and Frequency Response

·         Room: 230, Session Number: PGU303, Monday, November 18, 2019: 1:00 PM - 5:00 PM

Speaker(s)

Instructor+

Don Parker, M. Eng

Principal Engineer/ President

Provecta Process Automation LLC

United States

Instructor

Neil Ronan, BEng, IntPE(Aus)

Principal Engineer

Provecta Process Automation, LLC

United States


This course introduces thermal power plant processes and dynamics that are impacted by efforts to improve ramp rates, widen operating load ranges and provide frequency response services, and describes control strategies and tuning methods to improve ramping performance. For coal-fired plants, impacts include increased component thermal stress, steam temperature and pressure excursions, reduced efficiency and load- following accuracy, and low-load limits imposed by emissions reduction equipment.  

 

Sessions

 

Session 6B  Minimizing Flow-Accelerated Corrosion in Conventional and Heat Recovery Steam Generators

·         Room: 240-241  Session Number:6B3 Wednesday, November 20, 10:30 AM - 12:00 PM

·         Brad Buecker, Chemtreat

Session 3C: Operational Flexibility of Gas Turbine Power Plants

·         Room: 245 Session Number: 3C Wednesday, November 20, 2019: 1:00 PM - 2:30 PM

Session Co-Chair

Jeff Hatfield

Director, Business Development

Zachry Group

United States

 

Session Chair

Mitchell Krasnopoler

Manager, Air Quality

Kiewit

United States

 

Emerging renewable energy resources are disrupting the power market, which is requiring generators to look for more operational flexibility. This session will discuss the newest innovation to allow greater plant flexibility.

 

Session 6B: HRSG and SCR Performance Optimization 

 

·         Room: 240-241

 

Format: Paper

 

Options and solutions for addressing current demands on frequent cycling operation for HRSGs.

 

Session Chair

Sanjeev Jolly, P.E.

Sr. Engineer, Engineering Services

NAES Corp.

United States

 

Session Co-Chair

John Grusha

Director - Combustion Systems & Product Development

R-V Industries, Inc.

United States

 

Session 7A: Challenges and Sustainability of Coal Fired Generation

 

·         Room: 242

 

Format: Paper

 

This session will focus on existing coal-fired generation, much of which has increasingly restricted budgets for maintenance and upgrades. Topics will focus on practical strategies for optimizing and sustaining the performance

 

Session Chair

Stephen Henson

Manager Engineering

Evergy

United States

 

Session Co-Chair

Mark Barton

Plant Manager

Public Service Co. of Oklahoma

United States

 

Cycling Load, Dual Fuel Firing, and Understanding Operating and Maintenance Savings for Air Quality Control Systems

 

Speaker

Suzette Puski

Business Development Manager

Babcock Power Environmental

United States

 

Coal 2030: Is There A Light at the End of the Tunnel Or Is It An Oncoming Train?

Speaker

Una Nowling, P.E., M.Sc.

Technology Leader, Fuels & Reliability

Black & Veatch

United States

 

 

Co-Author

Laura Shafer

Asset Management Specialist

Black & Veatch Corporation

United States

 

 

Reclaiming and Recycling Coal Fly Ash for Beneficial Use

 

 

Speaker

William Fedorka, P.E.

Vice President, Engineering and Projects

The SEFA Group

United States

 

Session 7B: Operating Challenges of Cycling the Modern Coal Fleet

 

·         Room: 242

 

Format: Panel

 

This high-level panel discussion will cover the challenges faced by utilities operating coal-fired generation and the strategies needed to remain competitive in a fast-changing market. The conversation will include staffing challenges, technology adoption, operational flexibility, reliability, capital and environmental restrictions.

 

 

Moderator

Brandon Bell

Senior Vice President of Operations

Valdes Engineering Company

United States

 

 

 

Panelist

Jerry Meissner

Manager – Power Generation Plant Projects

We Energies and Wisconsin Public Service

United States

 

Panelist

Kyle Lewis

Unit Director

La Cygne

United States

 

Panelist

Rudy Navarro

Plant Manager - Coronado Generating Station

SRP

 


Relevant Exhibits

AECOM  

Princeton,  NJ 
United States
http://www.aecom.com

 

·         Booth: 2511

 

AECOM is a single-point contractor for grassroots, retrofit, and expansion projects in nuclear, fossil, and T&D. Our expertise spans front-end studies, consulting, program/project management, engineering, procurement, construction or construction management, startup, and operating unit support.

 

Products: engineering, construction, startup, environmental, nuclear, air quality, combined cycle, simple cycle, operating plants, maintenance, modification, conversion, transmission, substation, cogeneration

 

ADAMS VALVES INC.

Houston,  TX 
United States

 

·         Booth: 2230

 

 AERINOX INC.

Eaton,  CO 
United States
http://www.aerinox-inc.com

 

·         Booth 1455


AeriNOx supplies reliable and durable emissions solutions to stationary diesel and natural gas engine markets. Our highly integrated systems reduce NOx and other engine emissions up to 98%, with products custom-engineered to each customer’s application.

 

Products: SCR, DPF, Urea, Ammonia, Oxidation Catalyst

 

AIRPRO FAN & BLOWER COMPANY

Rhinelander,  WI 
United States
https://airprofan.com

 

·         Booth: 433

 

AirPro Fan & Blower Company is an employee-owned, engineer-operated manufacturer of industrial-duty centrifugal fans, blowers, parts, & accessories.

 

AirPro's general operating capabilities include horsepower up to 1000, pressures up to 145"wg, operating temps up to 1,700ºF, & flow rates up to 350,000 CFM.

 

Instant fan selection & pricing are available on myAirPro, the world's fastest fan selector for engineers, along with equipment drawings and performance data.

 

Products: Backward Inclined, Backward Curved, Centrifugal Radial Tipped, Heavy Duty & Industrial Exhaust, High Pressure, High Temperature Plug, API 673 & 560

 

APOLLO VALVES

Matthews,  NC 
United States
http://www.apollovalves.com

 

·         Booth: 3413

 

A-T CONTROLS INC

Cincinnati,  OH 
United States
http://www.atcontrols.com

 

·         Booth: 3319

 

A-T Controls, Inc. is a global leader in the manufacturing and sale of Manual & Automated Process Valves. With strong Engineering and Application expertise, and an unparalleled inventory, A-T Controls is ready to provide the highest quality products and Automated Valve Packages with the fastest turn-around time in the industry.

 

Visit us at Booth #3071 to learn more about our broad range of Soft Seated, Multiport, Metal Seated, Butterfly, High-Performance Butterfly, V-Port and Segment Control Valves; and the Industry’s finest line of TRIAC® Pneumatic and Electric Actuators and Control Accessories for Quarter-Turn Valve and Damper Drive Installations. A-T Controls is simply “The Best in the Industry”. For more information please call (513) 247-5465 or visit www.atcontrols.com

 

BLACK & VEATCH CORPORATION

Overland Park,  KS 
United States

 

·         Booth: 2039

 

BOLDROCCHI NORTH AMERICA

Kennesaw,  United States 
Georgia
http://www.boldrocchigroup.com

·         Booth: 1811

 

Brands: BOLDROCCHI North America - Air Pollution Control Equipment, Scrubbers, Fabric Filters, SCR & SNCR, ACI & DSI Systems, Fans, Dampers, Heat Exchangers etc. - Equipment Supply & Turnkey Solutions

 

BRAY INTERNATIONAL, INC

Houston,  TX 
United States
http://www.bray.com

·         Booth: 3725

At Bray International, Inc., our business is helping our customers with their flow control requirements. Our modular product line of valves, actuators and accessories offer the best compatibility, economy and quality performance in the flow control industry.

 

Brands: Bray Controls, Flow-Tek, Ritepro, Tri Lok

 

BURNS & McDONNELL

Kansas City,  MO 
United States
http://www.burnsmcd.com/

·         Booth: 4125

 

Burns & McDonnell is a full-service engineering, architecture, construction, environmental and consulting solutions firm.  We plan, design, permit, construct and manage facilities all over the world.

 

CECO ENVIRONMENTAL

Dallas,  TX 
United States
https://www.cecoenviro.com/brands

·         Booth: 1609

 

Brands: Ceco Environmental, Ceco Effox-Flextor, Ceco Peerless, Ceco Aarding

 

CHAMPION VALVES INC

Wilmington,  NC 
United States
http://www.wafercheck.com

 

·         Booth: 4225

 

Find out more about Champion Valves at www.wafercheck.com

Champion Valves is located in beautiful Wilmington, NC.  The office and warehouse facility is dedicated to meeting your needs with a complete range of high-quality and competitively priced check valves. We maintain a large inventory of finished check valves, backed by exceptional customer service.

Brands: CVR Dual Disc Wafer Check SDR Single Disc Wafer Check NZ Axial Flow Nozzle Globe Check NZW Axial Flow Nozzle Wafer Check SCW Silent Wafer Check SCG Silent Globe Check SCT Silent Threaded Check

 

CLARKE VALVE

North Kingstown,  RI 
United States

·         Booth: 2956

 

 

CO-AX VALVES INC. & QUADAX VALVES INC.

Bristol,  PA 
United States

·         Booth: 4624

 

Quadax Valves Inc. and Co-Ax Valves Inc., based in Bristol, Pennsylvania, is part of the Müller Co-Ax ag group, a world-renowned valve manufacturer since 1960.

 

For over 50 years, Müller Co-Ax ag has been an innovative leader in the unique design and manufacture of valve technology for businesses worldwide.​

quadaxvalves.com - coaxvalves.com

Brands: Co-ax Valves Inc, Quadax Valves Inc.

CONVAL, INC.

Somers,  CT 
United States
http://www.conval.com

·         Booth: 2918

 

Celebrating its 50th anniversary in 2017. Conval manufactures and markets U.S.-made, high-performance severe service Clampseal globe and Camseal metal-seated ball valves for a variety of power generation applications. Please meet us today at booth 5118 and visit us online at Conval.com.

 

Brands: Clampseal, Camseal, Swivldisc, Whisperjet


DCL AMERICA

Oak Ridge North,  TX 
United States
http://www.dcl-inc.com

 

·         Booth: 1457

DCL is a global leader in the design, manufacture and implementation of advanced emission control systems.

 

DCL's product offering includes catalytic converters, catalytic mufflers, engineered silencers, DPFs, replacement catalyst elements, heat recovery and siloxane cleanup solutions.

 

Brands: Brand names from DCL include MINE-X®, MINE-X SOOTFILTER® and QUICK-LID®.

 

 

DOOSAN HEAVY INDUSTRIES

Seoul, Korea (South)
http://www.doosanheavy.com

 

·         Booth: 1209

 

Doosan Heavy Industries & Construction owns core technologies and experiences in power generation business - EPC, boilers, turbines and generators. With Doosan Babcock (U.K.), Doosan Skoda Power (Czech Republic) and Doosan Lentjes (Germany), Doosan reinforced its competitiveness. Doosan also develops clean power including wind power and fuel cell.

 

 

DÜCHTING PUMPS

Fort Smith,  AR 
United States
http://www.DUECHTING.com/en

 

·         Booth: 2020

 

DÜCHTING PUMPEN is a privately owned, 3rd generation German company with 80 years of experience in the field of advanced centrifugal pumps for use in Flue-Gas Desulfurization, Boiler Feed Water, Seawater Desalination, Mining and Chemical industries.

 

Products: Corrosive/Abrasive Services, Silicon-Carbide Slurry Pumps, Metallic Slurry Pumps, Boiler Feed Pumps, Silicon-Carbide Coatings, Pump/Equipment Coating Repairs, Gypsum/Limestone Slurry, Ash Handling

 

EMERSON

Bloomington,  MN 
United States

 

·         Booth: 2826

F.O.S. INDUSTRIAL FILTER TECHNOLOGY, INC.

Quincy,  MA 
United States
http://www.fos-filtertec.com/

 

·         Booth: 4718

 

The F.O.S. Group offers comprehensive services related to all aspects of dedusting technology – combined with considerable expertise and personal commitment for sustainable environmental and climate protection.

 

Brands: F.O.S. On-Line Cleaning® F.O.S. Pulse Cleaning® F.O.S. Power Cleaning®

 

GLOBAL EMISSIONS SYSTEMS INC. (GESi®)

WHITBY,  ON CANADA
http://www.gesi.us

 

·         Booth: 849

 

Global Emissions Systems Inc., (GESi®)  designs, engineers, and manufactures, patented and proprietary emission reduction technol0gies designed for any engine using gasoline, propane, natural gas, diesel, bio-diesel landfill methane, bio-gas, or synthetic fuels. Products are verified and certified by the US EPA, ,CARB, MSHA, ETV, CARB and Euro.

 

Brands: GESi®, Global Emissions Systems, emission controls, emission reduction, catalytic converter, NOx, NMHC, CO, PM, DOC, DPF, NSCR, three-way catalyst, SCR, rich burn, lean burn, EPA, CARB, MSHA, ETV.

 

HAMON

Somerville,  NJ 
United States

 

·         Booth: 1725

Hamon Corporation, is an equipment manufacturer and construction company serving the Power and Oil & Gas markets. It provides Chimneys, HRSGs, Industrial Boilers,  Precipitators, Fabric Filters, Multi-pollutant Systems (ReACT), Scrubbers, Urea-to-Ammonia Systems, and Cooling Systems.

Products: Air Pollution Control; ESP; Fabric Filters; ReACT; Flue Gas Desulfurization; DeNOx; U2A; Wet Gas Scrubbers; Heat Recovery Steam Generators; Chimneys and Cooling Systems.

HAYNES INTERNATIONAL INC

Kokomo,  IN
United States
http://www.haynesintl.com

 

·         Booth: 3231

 

Haynes International is a developer, manufacturer, and distributor of HASTELLOY(R) and HAYNES(R) alloys used in high-temperature and corrosion applications. Standard products include sheet and plate, pipe and tube, wire and welding products, bar, and fittings and flanges. They also offer value-added services worldwide. They have more than 100 years of experience in the high-performance alloy industry.

 

HORIZON VALVE SERVICES INC

 

Hominy,  OK 
United States
http://horizonvalve.com

·         Booth: 3655

 

HOWDEN

Depew,  NY 
United States
https://www.howden.com/en-us

 

Howden provides FGD fans for power plants around the world and also provides oxidation blowers to convert calcium sulfite to sulfate.

 

·         Booth: 4250

 

 

HUG ENGINEERING INC.

 

Buford,  GA 
United States
http://www.hug-engineering.com

 

·         Booth: 438

 

Hug Engineering has over 30 years of experience in the design, development, manufacture, and application of exhaust gas treatment systems for reciprocating engines firing natural gas, biogas, diesel, crude oil, HFO, or dual fuels.  Hug’s technology is capable of reaching ultra-low NOx emissions (<5 ppm) with near zero ammonia slip, even on challenging transient applications with CEMs installed requiring continuous emissions compliance.  Applications range from standard installations for single pollutant control to systems in non-attainment areas requiring ultra-low NOx, CO, VOC, and NH3 slip control.  With systems on over 10,000 MWs of installed capacity, Hug has the experience and technology to make your project a success. 

 

 

JASC-CONTROLS

Tempe,  AZ 
United States
http://www.jasc-controls.com

 

·         Booth: 1004

 

JASC provides process control improvements for any industry. We evaluate system or sub-system performance and develop patentable designs to maximize productivity. Our ability to manufacture hardware, as required, provides comprehensive solutions for the most challenging operational problems.

 

Products: Valves, Water Injection, Purge Air, Monitoring Protection Systems, liquid fuel check valves, water-cooled check valves.

 

NEW YORK BLOWER COMPANY

Willowbrook,  IL 
United States
http://www.nyb.com

 

·         Booth: 1619

 

New York Blower manufactures industrial fans and blowers.

 

The New York Blower Company manufactures fans and blowers to the power, API, nuclear, industrial and OEM marketplaces. NYB and SSM Industries provide filtration decommissioning skids to the nuclear industry. Together, we can provide design, qualification, fabrication, and installation support to utilities in today’s nuclear market. For more information, visit www.nyb.com or www.ssmi.biz

 

Products: fans, blowers, industrial, nuclear, API, decommissioning, AG-1 qualified supplier, ISO 9000, centrifugal, axial, high pressure exhaust, air handling units, dampers, NQA-1, ASME N509.

 

R&R BETH FILTRATION

Atlanta,  GA 
United States
http://rr-bethfiltration.com

 

·         Booth: 1026

 

R&R BETH Filtration an international Company specialized in Filter and Extraction Technology. R&R BETH Filtration provides various types of Electrostatic Precipitators and Baghouse Filters for the flue gas cleaning. We design, produce and install both individual subassemblies and entire turnkey systems.

Products: ESP, electrostatic precipitator, flue gas filter, filter, filtration, dust collector, cyclones, R&R BETH Filtration, baghouse filter, Piping, Ducting, wet scrubbers, dust collector accessories.

 

ROBINSON FANS INC

Zelienople,  PA 
United States
http://www.robinsonfans.com/

 

·         Booth: 4122

 

Robinson Fans manufactures custom engineered and designed industrial fans to meet the needs of your business’ application. We have more than 100 years of experience in building air movement solutions and create the highest quality and most reliable industrial fans with exacting precision.

Products: Custom, Industrial Fans, Air Solutions, Services

 

RUHRPUMPEN, INC

Tulsa,  OK 
United States

 

·         Booth: 831

 

Ruhrpumpen is an innovative and efficient pump technology company that offers highly-engineered and standard pumping solutions for the oil & gas, power generation, industrial, water and chemical markets. They offer a broad range of centrifugal and reciprocating pumps that meet and exceed the requirements of the most demanding quality specifications and industry standards such as API, ANSI, UL, FM, ISO and HI.

 

Products: centrifugal pumps, Ruhrpumpen, power generation, pumps, innovative, pumping solutions, pumping technology.

 

SOUTHERN ENVIRONMENTAL, INC.

Pensacola,  FL 
United States
https://www.southernenvironmental.com/

 

·         Booth: 3504

 

Southern Environmental, Inc. serves the power market by providing Multiple-HAPS control equipment with single source emission guarantees for its clients.  As a Self-Performing Design and Erect Contractor, SEI solutions are the most cost effective in the market. 

 

SPX FLOW, Inc.

Charlotte,  NC 
United States
http://www.spxflow.com

 

·         Booth: 811

 

 SPX FLOW is a leading global supplier of highly engineered flow components, process equipment, and related aftermarket parts, focused on providing solutions that support the growing demand for more sustainable energy and power.

 

Products: Pumps, Valves, Filtration, Heat Exchangers, Hydraulic Tools, APV, Bolting Systems, Bran+Luebbe, ClydeUnion Pumps, Copes-Vulcan, Dollinger, Plenty, Power Team.

 

TELEDYNE MONITOR LABS

Englewood,  CO 
United States
http://www.teledyne-ml.com/

 

·         Booth: 3151

 

Teledyne Monitor Labs is a leading supplier of environmental monitoring instrumentation for the detection, measurement, and reporting of air pollutants. They have over 40 years of experience providing state-of-the-art Continuous Emissions Monitoring products to a wide variety of industrial markets.

 

THERMO FISHER SCIENTIFIC

Austin,  TX 
United States

 

·         Booth: 709

 

By helping our customers solve complex analytical challenges, Thermo Scientific™ Niton™ handheld XRF and LIBS analyzers bring your lab to the field. In the power generation industry, inspectors require top confidence in material analysis. Niton elemental analyzers offer superior detection limits and rapid results to ensure confident decision making. To learn more, visit thermofisher.com/PMI

 

Brands: Thermo Scientific™ Niton™ Apollo™ Handheld LIBS Analyzer, Thermo Scientific™ Niton™ XL5 Handheld XRF Analyzer, Thermo Scientific™ Niton™ XL2 Plus Handheld XRF Analyzer.

 

TIGER VALVE COMPANY

Houston,  TX 
United States

 

·         Booth: 242

 

 

TITAN FLOW CONTROL INC  

Lumberton,  NC 
United States
http://www.titanfci.com

 

·         Booth: 1319

 

Titan Flow Control, Inc. is proud to manufacture high quality check valves, y-strainers, basket strainers, duplex strainers, butterfly valves, pump protection products, fabricated products, and other pipeline accessories for commercial and industrial applications.

 

Products: Strainer, Check Valve, Hayward, Mueller, Flow Control, Pipeline, Valves, Y, Wye Strainer, Basket Strainer, Duplex Strainer, Foot Valve, Suction Diffuser, Ball Valves, Control Check.


UNIPER

Düsseldorf, Germany
https://www.uniper.energy/services/

 

·         Booth: 3711

 

Uniper Energy Services supports you adapting to the market by increasing plant flexibility, enabling digital plant management and optimizing solutions for all types of energy generation projects including renewables. Independent of OEMs and with 100 years international experience we manage risk, reduce costs and improve your plant operations.

Products: Flexible operations, digital plant management, through-life services, asset optimization, OEM independence, consultancy, engineering, software, analysis.

 

UNITED VALVE

Houston,  TX 
United States
http://www.unitedvalve.com

 

·         Booth: 3146

 

Through alliances and partnerships with 28 of the world’s top valve manufacturers, United Valve provides factory authorized valve modifications and repair services to a broad spectrum of distributors and end-users. Our 60,000 sq. ft. facility is located in Houston, Texas, in the heart of the Texas refining and petrochemical belt.

The shop is equipped with state-of-the-art machining, welding, pressure testing and non-destructive evaluation equipment. From X-ray radiography to CNC machining equipment, United Valve is vertically integrated to handle virtually any type of valve service in-house, with work performed by an experienced staff of technicians and craftsmen. Four overhead bridge cranes with a 25’ hook height enable us to handle valves up to 30 tons.

 

VICTAULIC

Eastib,  PA 
United States
http://www.victaulic.com/

 

·         Booth: 2530

 

As the world's leading producer of grooved mechanical pipe joining systems, Victaulic works collaboratively with its customers and affiliates worldwide to deliver innovative solutions across our core business areas. Our products and services put people to work faster while increasing safety, ensuring reliability and maximizing efficiency and sustainability. 

 

WOLF POINT ENGINEERS & CONTRACTORS

Chicago,  IL 
United States
http://www.wolfpointengineers.com

 

·         Booth: 2013

 

Wolf Point Engineers provides turn-key bulk material handling solutions for the power generating industry. Typical systems involve coal, pet coke, limestone, gypsum and wood chip handling. All projects involve engineering, procurement and construction services.

 

WOOD

Tucker,  GA 
United States
https://www.woodplc.com/

 

·         Booth: 3719

 

Wood is a global leader in the delivery of project, engineering and technical services to energy and industrial markets. We operate in more than 60 countries, employing around 55,000 people, with revenues of over $11 billion. We provide performance-driven solutions throughout the asset life-cycle, from concept to decommissioning across a broad range of industrial markets including the upstream, midstream and downstream oil & gas, chemicals, environment and infrastructure, power & process, clean energy, mining and general industrial sectors.

 

WSP USA

Lawrenceville,  NJ 
United States
http://www.wsp-pb.com/en/WSP-USA

 

·         Booth: 3619

 

WSP's Energy sector is best known for technical innovation and the demonstrated commercial success we achieve for our clients. As the global power generation, power delivery, and renewables arm of WSP, we deliver power sector engineering and project management services to clients worldwide, including ​developers, lenders, utilities, contractors and government agencies. Consistently ranked by Engineering News-Record as a Top 15 Worldwide Power Engineering Firm, our expertise in power generation encompasses conventional coal, oil, gas-fired, hydroelectric, and geothermal utility- and industrial-level power plants and alternative fuels ranging from municipal waste, wood, landfill gas and agricultural by-products, and renewables such as on-shore and off-shore wind and solar.